Blog

Learn something new with our collection of blog posts centered around various topics on PSpice® technology.

Make Reliable Designs That Won’t Fail In The Real World!- Use Smoke Analysis In PSpice (Part 3 of 4)

"A product recall is the process of retrieving and replacing defective goods for consumers". There are so many product recalls nowadays, especially in the Automotive and Cellphone industry. That's a pity...you got to avoid those recalls, or you may lose your value in the market. Effects of product recalls on companies have been well articulated here.

 

SPICE simulators in general are good at simulating circuits. But, they are not well equipped when it comes to finding the "bad" components in your design. By "bad", I mean the ones which are likely to fail in the future. As a designer, it’s your job/ responsibility to design the most reliable circuit for your application. You need to avoid the product recalls and save your company's money and reputation

 

PSpice Smoke Analysis makes it easy to find stressed components so you can design a more reliable circuit. It looks at your entire circuit and models expected current, voltage, power and temperature conditions for every component in your circuit- Now that is so cool!

 

Why to perform Smoke Analysis on your circuit? It has it's critical importance!

 

Importance of Smoke Analysis:

sm1.PNG

 

Precisely, Smoke Analysis determines:

  • Power dissipation for each component
  • Junction temperatures
  • Maximum current limits
  • Breakdown voltage across device terminals
  • Secondary breakdown limits

 

It calculates Peak, RMS and Average Values for all the components in your design. Let's look at the steps to be followed for Smoke Analysis,

 

Flow for Smoke Analysis:

smflow.PNG

 

Here's how the circuit setup for Smoke Analysis looks like,

 

Smoke Analysis Circuit Setup:

replace.PNG

                                             Figure 1: Example RF Amplifier Circuit with Smoke parameters specified

 

Figure 1 shows the same RF amplifier circuit we used in Blog 1 (Sensitivity Analysis) and Blog 2 (Optimizer) of this series. The values of R4 and R6 have been updated to the Optimized values obtained in Blog 2.

 

After running Smoke analysis on this circuit, the output window looks like Figure 2 (below)

 

Smoke Environment:

smenviron.PNG

                                                  Figure 2: Output window after performing Smoke Analysis

 

Looking at Figure 2, note that there is a red bar against the peak VCE value of Transistor Q1- 2N5179 which indicates that it is exceeding the safe operating limitNow that you have identified the component that might cause your design to fail in the future, you can either replace this component or adjust your design.

 

Let's go with replacing the 2N5179 transistor with a 2N4427 transistor whose values are closer.

 

Circuit Changes:

chg.PNG

 

                                                               Figure 3: Transistor replacement 

 

After making the circuit change, run the Smoke Analysis again and the new results look like this:

 

New Smoke Analysis results:

789_0.PNG

                              Figure 4: Output window after performing Smoke Analysis with the new transistor

 

New Smoke Analysis results show the all the components including the new transistor 2N4427 are within the safe operating limit. 

 

Realize what you just achieved here?

  • Potentially saved the product from failing
  • e.g. Even if you save 10% of your million/ billion products that you manufacture from failing, you are saving a whole lot of money
  • Above money, comes the reputation. Product's reliability is linked to the reputation of a company, prestige always comes first- you preserved that!
  • Avoided lawsuits- goes without saying, again alot of money.

 

Utilize Smoke Analysis within PSpice Advanced Analysis to make reliable circuits.

 

Video reference: Leverage PSpice Advanced Analysis to reduce design cost, improve design reliability, engineer's productivity and manufacturing yield.

 

Try the OrCAD free version yourself and start applying these Advanced Analysis capabilities on one of the many demo designs available in there.

 

 

 

 

Fri, 2024-03-15 04:34 (Reply to #72)
jeffreywarner283
Offline
Last seen: 8 months 1 week ago
Joined: 2024-03-15 04:10

In Springfield, PA, ensuring

In Springfield, PA, ensuring the safety and efficiency of your HVAC system and dryer is crucial. Regular maintenance, including cleaning, can not only extend the life of your appliances but also improve indoor air quality and reduce the risk of fire hazards. Let's explore why HVAC dryer cleaning Springfield PA is essential for homeowners in Springfield, PA.

Sun, 2021-12-12 04:48
normanpond8453
normanpond8453's picture
Offline
Last seen: 2 years 11 months ago
Joined: 2021-12-12 04:46

Wow! This PSpice Smoke

Wow! This PSpice Smoke Analysis is amazing and you discussed it very well.

mobile mechanic of los angeles

 

Fri, 2023-05-26 02:04 (Reply to #74)
c2tw
Offline
Last seen: 11 months 3 weeks ago
Joined: 2022-09-22 01:14

Amazing at work

most of the time I struggle to find blog post like yours, i m going to folow your post. Appliance repair Lawrenceville
 

Fri, 2023-07-21 01:18 (Reply to #75)
c2tw
Offline
Last seen: 11 months 3 weeks ago
Joined: 2022-09-22 01:14

Great Work

I really say this is an amazing article. Indianapolis egress windows

Sun, 2021-12-19 23:04
sarahroxon
sarahroxon's picture
Offline
Last seen: 2 years 11 months ago
Joined: 2021-12-19 22:46

I appreciate your initiative

I appreciate your initiative here, this will make some slope game improved designs a new idea.

Thu, 2023-02-23 04:34 (Reply to #77)
IngeWakita
Offline
Last seen: 2 days 3 hours ago
Joined: 2023-02-23 04:20

hanafuda earrings

hanafuda earrings

Wed, 2021-12-29 19:46
kubaallen20
Offline
Last seen: 2 years 10 months ago
Joined: 2021-12-29 19:44

Greetings!

I simply stumbled upon your blog and desired to say that I possess really enjoyed browsing your current posts. Anyways, check out this colorbond roof roof repair sydney that you might looking for.

Tue, 2022-01-04 21:32
melo96
Offline
Last seen: 2 years 10 months ago
Joined: 2021-10-03 23:49

Cadence® PSpice® is a full

Cadence® PSpice® is a full-featured, native analog and mixed-signal circuit simulator. 

Wed, 2022-01-26 15:33
MahNih
Offline
Last seen: 2 years 10 months ago
Joined: 2022-01-26 15:26

This is actually a great post

This is actually a great post. Very informative and helpful about electrical. I would like to know as well if there is an article about how much does junk removal cost?

Mon, 2022-02-14 09:50
Rehab Saran
Offline
Last seen: 2 years 9 months ago
Joined: 2022-02-14 09:48

Thanks for sharing. This is a great article

Thanks for sharing. This is a great article  <a href="https://glasgowresindrivewaysltd.co.uk// ">Paving Contractors Glasgow</a>

Sat, 2022-02-19 07:00
Angela224
Offline
Last seen: 2 years 9 months ago
Joined: 2022-02-18 06:05

Thanks for sharing this

Thanks for sharing this amazing post.

https://www.hemeldrywall.co.uk/dry-lining.html

Wed, 2022-02-23 11:35
nilehack9257
Offline
Last seen: 2 years 9 months ago
Joined: 2022-02-23 11:29

Thank you for creating this

Thank you for creating this content.

 

Toiture Victoriaville

Thu, 2022-02-24 06:29
cleo96
Offline
Last seen: 1 year 9 months ago
Joined: 2022-02-24 06:25

A material selection guide is

A material selection guide is as good a place as any to start. Your typical PCB consists of one or more layers of copper laminated between sheet layers of a non-conductive substrate. 

ensuite remodeling

Sat, 2022-03-05 09:32
cleo96
Offline
Last seen: 1 year 9 months ago
Joined: 2022-02-24 06:25

 Failure to reliably test a

 Failure to reliably test a design could lead to a costly setback in the production timeline. 

affordable bathroom remodeling minneapolis

Mon, 2022-03-28 01:55 (Reply to #89)
weblinkfroseo
Offline
Last seen: 2 years 2 months ago
Joined: 2021-10-11 09:28

TruShine Window Cleaning

I like your article very much, so really appriciate.

TruShine Window Cleaning

Sun, 2022-07-17 23:21 (Reply to #90)
amyreyes
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:11

Exactly

Having worked in this industry for many years now, we have staked a claim for ourselves as the most highly acclaimed team of

Bloomington Concrete Contractors.

Fri, 2022-04-22 22:06
OttoOsborn
OttoOsborn's picture
Offline
Last seen: 11 months 2 weeks ago
Joined: 2022-04-22 21:43

Very nice, indeed.

Very nice, indeed.
Spinner Tools

Tue, 2022-05-03 09:14
anthonyscotte23
Offline
Last seen: 2 years 6 months ago
Joined: 2022-05-03 09:12

This is a brilliant post I

This is a brilliant post I seen because of offer it. It is truly what I needed to see trust in future you will go on for sharing such an amazing post. barnet tree surgeon

Wed, 2022-05-04 15:28
kenjones
Offline
Last seen: 2 years 6 months ago
Joined: 2022-05-04 14:49

Reliability

Without reliable analysis, no results are worth anything. Good article. 

Analysis even of <a href="https://www.weymouthfloorrefinishing.com">wood floor refinishing</a> is critical.

 

Wed, 2022-05-04 15:30
kenjones
Offline
Last seen: 2 years 6 months ago
Joined: 2022-05-04 14:49
Fri, 2022-05-13 03:59
weblinkfroseo
Offline
Last seen: 2 years 2 months ago
Joined: 2021-10-11 09:28
Thu, 2022-05-19 10:38
ReineV
Offline
Last seen: 2 years 6 months ago
Joined: 2022-05-19 10:31

Thank you

Thanks for

 sharing

http://google.com

Fri, 2022-05-20 12:13
ReineV
Offline
Last seen: 2 years 6 months ago
Joined: 2022-05-19 10:31

Bravo!

Bravo! Thank you for sharing this 4-part series of informative post. I would also like to share this one out www.pittsburghlandsurveyors.com/as-built-surveys/ as this is equally informative and reliable too.

Wed, 2022-06-01 01:47
neebwhitlinger25
Offline
Last seen: 2 years 2 months ago
Joined: 2022-06-01 01:42

Due to the voltage drop

Due to the voltage drop across the MOSFET and rectifier diodes, the turn ratio can be considered as 11. If the primary magnetizing inductance is considered as 10mH, secondary coil inductance will be 1210mH. 

 

Dump pickup

Wed, 2022-06-01 02:37
consuelafox0
Offline
Last seen: 2 years 5 months ago
Joined: 2022-06-01 02:07

As a designer, it’s your job/

As a designer, it’s your job/ responsibility to design the most reliable circuit for your application. You need to avoid the product recalls and save your company's money and reputation - 

pool filter cleaning

Tue, 2022-06-28 05:49
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

You have outdone yourself

You have outdone yourself this time. It is probably the best, most short step by step guide that I have ever seen. เว็บเกมออนไลน์ตรง

Sun, 2022-07-17 23:06
migzsr
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:03

Informative

Glad I was able to visit this site. I was wondering if this is updated. | 

nycdemolitioncontractor.com

Sun, 2022-07-17 23:09
migzsr
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:03

By the way, I've read a lot

By the way, I've read a lot of information and this is by far the most reliable source. 

Read More Here.

Sun, 2022-07-17 23:14
amyreyes
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:11

Complicated

This is a hard topic especially when you are not into electronics. But I'm pretty sure that I'll be able to learn it if I studied the basic principle. | 

epoxygaragefloorportstlucie.com

Sun, 2022-07-17 23:38
Mikay
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:32

Interesting!

Learning a very specifiic skill is an asset that will get you success. For such to know these things are impressive and critical thinkers. | 

https://evansvilleconcrete.com

Sun, 2022-07-17 23:44
bobjones
Offline
Last seen: 2 years 4 months ago
Joined: 2022-07-17 23:41

A Very Detailed Information

One of the most interesting subject matter for me is Electronics. I made sure that I got to learn from the expert 

Fort Wayne Concrete Contractors. It is very helpful.

Wed, 2022-07-27 10:49
MarkS
Offline
Last seen: 2 years 3 months ago
Joined: 2022-07-26 12:39

Great

Thanks for sharing such a great content. www.milwaukeefencecompanies.com

Wed, 2022-07-27 12:57
basti
Offline
Last seen: 2 years 2 months ago
Joined: 2022-07-27 12:52

What now?

I think everything has its flaw but then I like how the design of this work. Only thing now is test it. estate clean-out in New Orleans

Thu, 2022-07-28 09:42
MarkS
Offline
Last seen: 2 years 3 months ago
Joined: 2022-07-26 12:39

Great

Great post.  fencing-lincoln-ne

Fri, 2022-07-29 09:23
john brilleoo00
john brilleoo00's picture
Offline
Last seen: 2 years 3 months ago
Joined: 2022-06-02 07:29

Decent post continue to share

Decent post continue to share new things on the off chance that you are searching for the advertising administrations, 

small business accounting

Tue, 2022-08-02 02:30
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

This is a great post. I like

This is a great post. I like this topic.This site has lots of advantage.I found many interesting things from this site. It helps me in many ways.Thanks for posting this again. Kondisyon Visa Latiki

Sun, 2022-08-07 01:11
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Wow, excellent post. I'd like

Wow, excellent post. I'd like to draft like this too - taking time and real hard work to make a great article. This post has encouraged me to write some posts that I am going to write soon. Indian Visa Online

Mon, 2022-08-08 07:55
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Your blog has piqued a lot of

Your blog has piqued a lot of real interest. I can see why since you have done such a good job of making it interesting. I appreciate your efforts very much. कनाडा वीज़ा ऑनलाइन आवेदन

Thu, 2022-08-11 06:47
akriti
Offline
Last seen: 1 year 9 months ago
Joined: 2022-08-11 06:32

Enjoy Erotic Ride With Jaipur Escorts

 

What is your supposition out of your Escorts Service in Jaipur? Indeed, sooner than you cure that, we perceive that you need to get a value administration out of your Jaipur Escorts. However, a few recollections of this venture have squeezed you to take a second idea. All things considered, we demand you to give us a gamble. We are right now not any more nee on this business. However, one on whom shoppers can imagine blindfolded. We keep a lengthy posting of unswerving shoppers who for the most part take companion administration from us. Expanding the real Jaipur Escorts Service. we have gotten remained with the assistance of utilizing their angle to fulfill their sexy necessities. They consider us for getting an answer that is all around certainly worth each piece of cold hard cash they purchased by employing our Jaipur Escort Solution.

Mon, 2022-08-15 01:48
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Your blog has chock-a-block

Your blog has chock-a-block of useful information. I liked your blog's content as well as its look. In my opinion, this is a perfect blog in all aspects. click here

Sat, 2022-08-20 06:23
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Awesome article! I want

Awesome article! I want people to know just how good this information is in your article. It’s interesting, compelling content. Your views are much like my own concerning this subject. yak chews for dogs

Sun, 2022-08-21 03:19
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Your content is nothing short

Your content is nothing short of brilliant in many ways. I think this is engaging and eye-opening material. Thank you so much for caring about your content and your readers. ינדיאַ ביזנעס וויזאַ

Tue, 2022-08-23 05:07
Hannah89
Offline
Last seen: 1 year 7 months ago
Joined: 2022-08-23 05:04

Looks awesome

Thank you for this, I learned a lot. 

concrete contractors brooklyn ny

Tue, 2022-08-23 05:13
remi973
Offline
Last seen: 1 year 7 months ago
Joined: 2022-08-23 05:11

This is interesting

This looks like an interesting post. Thank you for this. 

Awning Brooklyn

Tue, 2022-08-23 05:16
alfredo0032
Offline
Last seen: 1 year 7 months ago
Joined: 2022-08-23 05:14

Very Helpful

Thank you for the very helful post. 

aluminum fence miami

Sat, 2022-08-27 02:20
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Thanks so much for sharing

Thanks so much for sharing this awesome info! I am looking forward to see more postsby you! EVISA INDIA

Mon, 2022-08-29 01:08
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

I have been checking out a

I have been checking out a few of your stories and i can state pretty good stuff. I will definitely bookmark your blog Best SEO experts

Thu, 2022-09-01 09:08
weblinkfroseo
Offline
Last seen: 2 years 2 months ago
Joined: 2021-10-11 09:28

Very Nice work

Very Nice work

Pressure Washing

Sat, 2022-09-03 05:55
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

The post is written in very a

The post is written in very a good manner and it contains many useful information for me. VISA PARA SA CANADA

Wed, 2022-09-07 06:13
basit khatri66
basit khatri66's picture
Offline
Last seen: 2 months 5 days ago
Joined: 2022-06-28 05:48

Pretty nice post. I just

Pretty nice post. I just stumbled upon your weblog and wanted to say that I have really enjoyed browsing your blog posts. After all I’ll be subscribing to your feed and I hope you write again soon! Solicitação de visto online para o Canadá

Download PSpice and try it for free! Download Free Trial
Cadence